References

Syntax Legends

This section describes the syntax formatting used in declarations of configuration options and commands.

Symbol	Description
Bold	Kore will not reply to repeating messages from the same player.
< >	Information that the user must specify.
( )	Required parameters.
[ ]	Optional parameters.
|	OR. This separates choices from which the user must choose only one.

Basic Value and Parameter Types

This section describes the basic types that may appear in a configuration option's value or a command parameter.

Type	Description
flag	A number with special meaning on its current context. The list of meaningful values are always given.
boolean flag	A type of flag with only two meaningful values: 1 to enable (turn on) or 0 to disable (turn off).
number	Any number. This can be a fractional value (distance) or whole counting numbers (amount, damage, level) depending on the current context.
percent	A number from 0 to 100 that corresponds to a percent. Don't append a percent sign (%) unless otherwise specified.
seconds	The time specified in seconds. This can be a fractional value (e.g. 0.5).
string	Any text string (alias name, password, callsign). See also Names (Text).

Equipment Slots

Kore can now efficiently equip items on specific equipment slots. You can automatically equip an item on certain conditions (equipAuto), when you attack with your weapon (attackEquip), on teleport (teleportAuto_equip), and when using skills (shared skill block attribute equip).

The following is a list of equipment slots.

Name	Description
topHead	Specifies the top head gear to equip.
midHead	Specifies the middle head gear to equip.
lowHead	Specifies the lower head gear to equip.
rightHand	Specifies the weapon to equip on the right hand.
leftHand	Specifies the weapon or shield to equip on the left hand.
rightAcessory	Specifies the accessory to equip on the right accessory slot.
leftAcessory	Specifies the accessory to equip on the left accessory slot.
armor	Specifies the armor to equip.
robe	Specifies the garment to equip.
shoes	Specifies the footwear to equip.
arrow	Specifies the arrows to equip when using a bow-type weapon.

Message Domains

Message domains are names used to classify messages printed in the console.

If you want to find out the domain of certain messages that you see in your console, set the option showDomain in config.txt to 1. Doing so will make Openkore display domains along with messages in the console.

The following is a list of known message domains:

Name	Description
ai_attack	Attack messages
ai_npcTalk	Sequential conversation with NPC (talknpc)
attacked	Monster attacks you
attackedMiss	Monster attacks you but misses
attackMon	You attack monster
attackMonMiss	You attack monster but misses
connection	Connection messages
console	Default domain for messages that have no defined message group. (Note. You can't use this with verboseDomains and squelchDomains.
deal	Deal messages
drop	Monster drop related
emotion	Emoticon
exp	Experience gained
equip	Equipment switching
follow	Follow messages
guildchat	Guild chat message
guildnotice	Guild notice message
info	View info that's requested by the user (status, guild info, etc.)
input	Waiting for user input
inventory	Inventory related messages
list	List of information (monster list, player list, item list, etc.)
load	Loading config files
looter	Attacking looter
map_event	PvP/GvG mode messages
emotion	NPC messages
parseMsg_statuslook	Looks (skill status or ailments, muted, summoned spirit, equipment changes, sit, stand)
parseMsg/hairColor	Hair color change
parseMsg/job	Job change
parseMsg/upgrade	Item upgrading
party	Party/follow related
partychat	Party chat messages
pet	Pet related messages
plugins	Messages about plugin handling
pm	Private chat message
pm/sent	Private chat message sent by you
portals	Portal exists
portalRecord	Recording of portals
publicchat	Public chat message
refine	Weapon refining
route	Routing/pathfinding messages
route_teleport	Route teleport messages
schat	GM broadcast messages
selfSkill	Skills used by yourself
skill	Skill use unrelated to attack
sold	Item sold while vending.
startup	Messages that are printed during startup.
storage	Storage item added/removed
success	An operation succeeded
syntax	Syntax check files
syntax	Syntax check files
teleport	Teleporting
useItem	You used item
useTeleport	Attemp to use teleport
waypoint	Waypoint messages
xkore	X-Kore system messages

The following is a list of debug domains.

ai ai_attack ai_autoCart ai_makeItem ai_move ai_npcTalk attackMonMiss autoBreakTime

connection d_sendPacket debug drop equipAuto guild ipc Item

monsterSkill npc packetParser parseInput parseMsg parseMsg_comboDelay parseMsg_damage parseMsg_move

parseMsg_presence parseMsg_presence/name parseMsg_presence/player parseMsg_presence/remote parseMsg_statuslook parseSendMsg pet route

route_teleport sendPacket sitAuto skill storage useTeleport vending

Names

This section describes the names used as values in configuration options.

Equipment Names

For equipments, it is best to use the console commands to get the exact name of your items (see Item Names). However, this is only applicable if you already have that certain item in your inventory, cart or storage. If you want to specify an equipment that you don't currently possess, use the following syntax as a guide when writing down equipment names:

# for normal equipments:
[BROKEN] [+<upgrade level>] (<item name>) [[<card name>[*<number>]] [<number of slots>]]

# for elemental weapons
[BROKEN][+<upgrade level>][VS|VVS|VVVS][Fire|Earth|Wind|Water](<item name>) 

Notes:

• If the equipment is not "broken", omit the BROKEN part.
• If the equipment is not upgraded, omit the +<upgrade level> part.
• Use only the monster name for the card name (omit the "Card" part), e.g. use Hydra for the Hydra Card.
• If there is only one card of a certain type slotted on the equipment, omit the *<number> part.
• If there are more than one type of cards compounded on the equipment, the <card name>*<number> pair can be a colon-separated list. The list should be sorted alphabetically.
• If the equipment is not slotted, omit the [<number of slots>] part.

Example:
If you want to use a +4 Cranial Mirror Shield, a Hard Padded Armor, a 3-slotted +5 Double Flammable Boned Saber, and a +6 Very Very Strong Wind Tsurugi, use:

+7 Mirror Shield [Thara Frog] [1]
Padded Armor [Pupa] [1]
+5 Saber [Skel Worker,Vadon*2] [3]
+6 VVS Wind Tsurugi

In v.1.9.x, the 3-slotted +5 Double Flammable Boned Saber described above would have to be written like the following (note the change in the card separator from comma to colon):

(V.1.9.x) +5 Saber [Skel Worker:Vadon*2] [3]

Note. So far configuration options using item names are not strict with case-sensitivity.

Item Names

The correct item names can be found by using the console commands i (inventory items), cart (cart items), and storage (storage items). You can also use store (buy list from NPC) or vender (vender shop list). Use the names as they are displayed in the lists.

You can also find the simple item names in the file tables\items.txt. For example:

2107#Mirror_Shield#

The string that appears after the first number sign (#) on each line is the item name used by Openkore. Replace the underscores (_) with space. In this case, the item name is Mirror Shield.

Note. So far configuration options using item names are not strict with case-sensitivity.

Ground Spell Names

Ground spell names can be found by using the console command spells while certain spells are active on the ground.

You can also find them in the file tables\spells.txt. For example:

126 Safety Wall

The string that appears after the first number on each line is the ground spell name used by Openkore. In this case, the ground spell name is Safety Wall.

Note. These are case-sensitive.

Map Names

Map names can be found by using the console command where.

You can also find them in the file tables\maps.txt. For example:

prontera.rsw#Prontera City#

The first word that appears on each line excluding the .rsw file extension is the map name used by Openkore. In this case, the map name is prontera.

Note. These are case-sensitive.

Monster Names

Monster names can be found by using the console command ml while certain monters are on screen.

You can also find them in the file tables\monsters.txt. For example:

1001 Scorpion

The string that appears after the first number on each line is the monster name used by Openkore. In this case, the monster name is Scorpion.

Note. These are case-sensitive.

Player Names

Player names can be found by using the console command pl while certain players are on screen.

Note. These are case-sensitive.

Skill Names

The correct skill names can be found by using the console command skills to list available skills for your character.

You can also find them in the file tables\skills.txt. For example:

NV_BASIC#Basic_Skill#

The string that appears after the first number sign (#) on each line is the skill name used by Openkore. Replace the underscores (_) with space. In this case, the skill name is Basic Skill.

Note. These are case-sensitive.

Status Names

Status names can be found by using the console command s while certain status are active on you character.

You can also find them in the files tables\skillsailments.txt, tables\skillslooks.txt, tables\skillsstate.txt, tables\skillsstatus.txt. For example:

1 Poisoned

The string that appears after the first number on each line is the status name used by Openkore. In this case, the status name is Poisoned.

Note. These are case-sensitive.

NPC Conversation Codes

These codes are used for specifying NPC talk sequences or steps when using the console command talknpc or the config.txt option storageAuto_npc_steps.

The following is a list of known NPC talk codes.

Code	Description
c	Continue talking to the NPC. This is the same as pressing the next when you talk to an NPC in the RO Client.
r(<response #>)	Send response. The response number is the index of the response in the displayed response list (the first response has the index 0). This is the same as selecting a response when you talk to an NPC in the RO Client.
w(<seconds>)	Wait for the specified number of seconds before continuing to talk to the NPC using the next talk code.
d(<number>)	Send a number to the NPC. Use this if the NPC asks you to enter an amount.
t=(<string>)	Send a string or text to the NPC. Use this if the NPC asks you to enter some text.
s	Get sell list. This is the same as pressing the sell button when you talk to a buy/sell NPC in the RO Client.
b	Get the store list. This is the same as pressing the buy button when you talk to a buy/sell NPC in the RO Client.
b(<store item #>),(<amount>)	Buy an item from the NPC. See similar buy. Note that the amount is not optional.
n	Immediately end or cancel conversation with the NPC. This is the same as pressing the close or cancel button when talking to an NPC in the RO Client.
e	Wait until the NPC says "Done talking". Use this after the s or b talk code when talking to a buy/sell NPC.

When specifying NPC talk codes, separate each code with whitespace. For example, by using the following command, you will be able to refine a weapon with the Blacksmith NPC inside Prontera, assuming you are inside the BlackSmith shop in Prontera and the NPC stands on the coordinates (63, 60).

talknpc 63 60 c r3 c r0 c c r0 c n

Range Operators

Range operators provide flexibility in specifying values for some config.txt options by specifying ranges instead of exact values. The following defines the syntax for specifying ranges.

Symbol	Description
X	Value is exactly equal to X
X..Y	Includes all numbers from X to Y
X-Y	Includes all numbers from X to Y
> X	Value is greater than X
>= X	Value is greater than or equal to X
< X	Value is less than X
<= X	Value is less than or equal to X

The following example will change config to config_2.txt if you are a Novice whose job level is exacly equal to 10.

autoConfChange control/config_2.txt {
       isJob Novice 
       joblvl 10 
} 

The following example will use level 1 FireBolt on a Geographer if the current SP is greater than 5 percent and the monster's deltaHp is from -8070 to -7890.

attackSkillSlot Fire Bolt {
       lvl 1 
       dist 9 
       sp > 5% 
       monsters Geographer 
       target_deltaHp -8070..-7890 
}

The following example will use Heal on self if the current HP is less than 50 percent and the current SP is greater than or equal to 20 percent.

useSelf_skill Heal {
       lvl 10 
       hp < 50% 
       sp >= 20% 
}

Self Conditions

These condition options are shared between the attackComboSlot, attackSkillSlot, buyAuto, doCommand, equipAuto, monsterSkill, partySkill, useSelf_item, and useSelf_skill configuration blocks.

aggressives defendMonsters disabled hp inCart inInventory inLockOnly inMap

monsters notInTown notMonsters notOnAction notInMap notWhileSitting onAction partyAggressives

sp spirit stopWhenHit timeout whenFlag whenFollowing whenGround whenIdle

whenNotFlag whenNotGround whenNotPermitSkill whenPermitSkill whenStatusActive whenStatusInactive whenWater - not working yet

Target Conditions

Monster Conditions

These condition attributes are shared between the attackComboSlot, attackSkillSlot, equipAuto, and monsterSkill configuration blocks.

target_deltaHP target_dist target_misses

target_timeout target_totalMisses target_whenGround

target_whenNotGround target_whenStatusActive target_whenStatusActive

Player Conditions

Currently, only the partySkill configuration block uses these conditions.

target_aggressives target_dead target_defendMonsters target_deltaHP target_dist target_hp

target_isGuild target_isJob target_isNotJob target_monsters target_notWhileSitting target_timeout

target_whenGround target_whenNotGround target_whenShieldEquipped target_whenStatusActive target_whenStatusInactive target_whenWeaponEquipped

Skill Use Conditions

These options are shared between the attackComboSlot, attackSkillSlot, monsterSkill, partySkill, and useSelf_skill configuration blocks.

• lvl

• maxCastTime

• minCastTime

• equip